An ambient thermostat controls and regulates the ambient temperature of a room. It is therefore used to modify the operation of appliances such as gas heating, wood stove, heat pump, oil boiler, etc. What is the operating principle of an ambient thermostat? Where should I place it? What is the difference between a bimetallic, programmable and connected thermostat? How do I choose your thermostat? This is answered in the rest of this article.
How the mood thermostat works
A thermostat can determine the ideal temperature according to your needs and maintain that temperature. For the proper operation of an ambient thermostat,it is recommended to rotate your heating throughout the day. Sudden blows of temperatures should be avoided at the risk of disrupting the stability of the heater.
The ambient thermostat is mainly used in homes during the winter, which not only provides comfort, but also saves energy. Setting up a thermostat is a must. A programmable thermostat will activate or disable your heating system as needed. By measuring the temperature in the room in which it is located, the thermostat regulates the temperature of your home in relation to a temperature you have informed.
While we all know electronic thermostats now, they did not always exist.
Evolution of the thermostat
In the past, there were dwellings with conventional thermostats with a dial to adjust the interior temperature. Too inaccurate and offering no programming possible, these so-called bimetallic thermostats have gradually fallen into disuse to make way for the new electronic thermostats. This new generation of thermostats allows precisely programming and setting the temperature as mentioned above. In addition, so-called connected and intelligent thermostats have been available for some time. Indeed, the revolution of smartphones and connected objects has greatly changed the way of life of billions of people, making everyday life more enjoyable.
Positioning your mood thermostat is not a trivial act.
Where to place an ambient thermostat?
The location of an ambient thermostat must be sufficiently thoughtful to meet its main objectives: to reduce energy consumption and not overheat unnecessarily. In addition, the measurements could be distorted if it is not properly installed. A good installation of the ambient thermostat also optimizes and controls the thermal comfort in every room of the house.
To succeed in this delicate mission of installing the ambient thermostat in the best location, choose the main room of your home. The thermostat should be placed about 1.50 m from the ground and away from sources of heat, such as a radiator, or cold, such as a window. This, for example, prevents measurements from being reduced by drafts.
The thermostat should not be hidden behind a door or covered by furniture. There is also no need to place it in the kitchen when other parts of the house need permanent heating; which is not the case with the kitchen. Ideally, you should have a thermostat in every room of your home. If you don’t have more than one, it’s best to install your thermostat in the living room.
Now you know where to place it, but do you know which programmable thermostat to choose?
Criteria for choosing a programmable thermostat
The following factors will help you make an informed choice about buying your home’s future thermostat.
The type of programmer
It can be either wired or radio, i.e. wireless. In the case of a renovation, it is recommended to choose a radio thermostat. Wave programming is done without work and all you have to do is connect the radiator’s pilot wire to the receiver box.
The two thermostats to be preferred to effectively adjust the temperature in its interior are the ambient thermostat with a day and night setting and the programmable thermostat. Non-programmable ambient thermostats are actually older-generation thermostats. They regulate the ambient temperature of your home at a single set temperature, but do not promote energy savings.
The number of customizable programs
This option will allow you to customize your heating system at will. Plus, if your thermostat offers the ability to do multiple programs in different areas, the user experience would be even better. Pre-established programs are frequently recorded to help you set up your settings. Indeed, it is necessary to differentiate the temperature according to the day, the night, the days of the week, the weekend, the frost, etc.
The addition of an external probe
The objective of an external probe is to regulate the temperature of the dwelling taking into account the outside temperature.
What about the connected thermostat?
The connected ambient thermostat is the third generation of ambient thermostat. Smart and connected, these thermostats memorize your habits to offer you programming based on your lifestyle. The reason for its success lies in its automatic programming and ease of use. With a connected thermostat, the temperature adjustment is done automatically and the user has the ability to control everything from his smartphone or tablet.
